Clean up kitty

kitty/.config/kitty/kitty.conf

@@ -1,792 +1,13 @@
 # vim:fileencoding=utf-8:ft=conf:foldmethod=marker
 
-#: Fonts {{{
-
-#: kitty has very powerful font management. You can configure
-#: individual font faces and even specify special fonts for particular
-#: characters.
 include ./kitty-themes/themes/Monokai.conf
 
 font_family Go Mono
-# bold_font        auto
-# italic_font      auto
-# bold_italic_font auto
-
-#: You can specify different fonts for the bold/italic/bold-italic
-#: variants. By default they are derived automatically, by the OSes
-#: font system. Setting them manually is useful for font families that
-#: have many weight variants like Book, Medium, Thick, etc. For
-#: example::
-
-#:     font_family      Operator Mono Book
-#:     bold_font        Operator Mono Medium
-#:     italic_font      Operator Mono Book Italic
-#:     bold_italic_font Operator Mono Medium Italic
-
 font_size 10.0
-
-#: Font size (in pts)
-
-# adjust_line_height  0
-# adjust_column_width 0
-
-#: Change the size of each character cell kitty renders. You can use
-#: either numbers, which are interpreted as pixels or percentages
-#: (number followed by %), which are interpreted as percentages of the
-#: unmodified values. You can use negative pixels or percentages less
-#: than 100% to reduce sizes (but this might cause rendering
-#: artifacts).
-
-# symbol_map U+E0A0-U+E0A2,U+E0B0-U+E0B3 PowerlineSymbols
-
-#: Map the specified unicode codepoints to a particular font. Useful
-#: if you need special rendering for some symbols, such as for
-#: Powerline. Avoids the need for patched fonts. Each unicode code
-#: point is specified in the form U+<code point in hexadecimal>. You
-#: can specify multiple code points, separated by commas and ranges
-#: separated by hyphens. symbol_map itself can be specified multiple
-#: times. Syntax is::
-
-#:     symbol_map codepoints Font Family Name
-
-# box_drawing_scale 0.001, 1, 1.5, 2
-
-#: Change the sizes of the lines used for the box drawing unicode
-#: characters These values are in pts. They will be scaled by the
-#: monitor DPI to arrive at a pixel value. There must be four values
-#: corresponding to thin, normal, thick, and very thick lines.
-
-#: }}}
-
-#: Cursor customization {{{
-
-# cursor #cccccc
-
-#: Default cursor color
-
-# cursor_shape block
-
-#: The cursor shape can be one of (block, beam, underline)
-
-# cursor_blink_interval      0.5
-# cursor_stop_blinking_after 15.0
-
-#: The interval (in seconds) at which to blink the cursor. Set to zero
-#: to disable blinking. Note that numbers smaller than repaint_delay
-#: will be limited to repaint_delay. Stop blinking cursor after the
-#: specified number of seconds of keyboard inactivity. Set to zero to
-#: never stop blinking.
-
-#: }}}
-
-#: Scrollback {{{
-
-# scrollback_lines 2000
-
-#: Number of lines of history to keep in memory for scrolling back.
-#: Memory is allocated on demand.
-
-# scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER
-
-#: Program with which to view scrollback in a new window. The
-#: scrollback buffer is passed as STDIN to this program. If you change
-#: it, make sure the program you use can handle ANSI escape sequences
-#: for colors and text formatting. INPUT_LINE_NUMBER in the command
-#: line above will be replaced by an integer representing which line
-#: should be at the top of the screen.
-
-# wheel_scroll_multiplier 5.0
-
-#: Modify the amount scrolled by the mouse wheel or touchpad. Use
-#: negative numbers to change scroll direction.
-
-#: }}}
-
-#: Mouse {{{
-
-# url_color #0087BD
-# url_style curly
-
-#: The color and style for highlighting URLs on mouse-over. url_style
-#: can be one of: none, single, double, curly
-
-# open_url_modifiers kitty_mod
-
-#: The modifier keys to press when clicking with the mouse on URLs to
-#: open the URL
-
-# open_url_with default
-
-#: The program with which to open URLs that are clicked on. The
-#: special value default means to use the operating system's default
-#: URL handler.
-
-# copy_on_select no
-
-#: Copy to clipboard on select. With this enabled, simply selecting
-#: text with the mouse will cause the text to be copied to clipboard.
-#: Useful on platforms such as macOS/Wayland that do not have the
-#: concept of primary selections. Note that this is a security risk,
-#: as all programs, including websites open in your browser can read
-#: the contents of the clipboard.
-
-# rectangle_select_modifiers ctrl+alt
-
-#: The modifiers to use rectangular selection (i.e. to select text in
-#: a rectangular block with the mouse)
-
-# select_by_word_characters :@-./_~?&=%+#
-
-#: Characters considered part of a word when double clicking. In
-#: addition to these characters any character that is marked as an
-#: alpha-numeric character in the unicode database will be matched.
-
-# click_interval 0.5
-
-#: The interval between successive clicks to detect double/triple
-#: clicks (in seconds)
-
-# mouse_hide_wait 3.0
-
-#: Hide mouse cursor after the specified number of seconds of the
-#: mouse not being used. Set to zero to disable mouse cursor hiding.
-
-# focus_follows_mouse no
-
-#: Set the active window to the window under the mouse when moving the
-#: mouse around
-
-#: }}}
-
-#: Performance tuning {{{
-
-# repaint_delay 10
-
-#: Delay (in milliseconds) between screen updates. Decreasing it,
-#: increases frames-per-second (FPS) at the cost of more CPU usage.
-#: The default value yields ~100 FPS which is more than sufficient for
-#: most uses. Note that to actually achieve 100 FPS you have to either
-#: set sync_to_monitor to no or use a monitor with a high refresh
-#: rate.
-
-# input_delay 3
-
-#: Delay (in milliseconds) before input from the program running in
-#: the terminal is processed. Note that decreasing it will increase
-#: responsiveness, but also increase CPU usage and might cause flicker
-#: in full screen programs that redraw the entire screen on each loop,
-#: because kitty is so fast that partial screen updates will be drawn.
-
-# sync_to_monitor yes
-
-#: Sync screen updates to the refresh rate of the monitor. This
-#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing)
-#: when scrolling. However, it limits the rendering speed to the
-#: refresh rate of your monitor. With a very high speed mouse/high
-#: keyboard repeat rate, you may notice some slight input latency. If
-#: so, set this to no.
-
-#: }}}
-
-#: Terminal bell {{{
-
 enable_audio_bell no
-
-#: Enable/disable the audio bell. Useful in environments that require
-#: silence.
-
 visual_bell_duration 0.1
-
-#: Visual bell duration. Flash the screen when a bell occurs for the
-#: specified number of seconds. Set to zero to disable.
-
-# window_alert_on_bell yes
-
-#: Request window attention on bell. Makes the dock icon bounce on
-#: macOS or the taskbar flash on linux.
-
-# bell_on_tab yes
-
-#: Show a bell symbol on the tab if a bell occurs in one of the
-#: windows in the tab and the window is not the currently focused
-#: window
-
-#: }}}
-
-#: Window layout {{{
-
-# remember_window_size  yes
-# initial_window_width  640
-# initial_window_height 400
-
-#: If enabled, the window size will be remembered so that new
-#: instances of kitty will have the same size as the previous
-#: instance. If disabled, the window will initially have size
-#: configured by initial_window_width/height, in pixels. You can use a
-#: suffix of "c" on the width/height values to have them interpreted
-#: as number of cells instead of pixels.
-
-# enabled_layouts *
-
-#: The enabled window layouts. A comma separated list of layout names.
-#: The special value * means all layouts. The first listed layout will
-#: be used as the startup layout. For a list of available layouts, see
-#: the layouts.
-
-# window_resize_step_cells 2
-# window_resize_step_lines 2
-
-#: The step size (in units of cell width/cell height) to use when
-#: resizing windows. The cells value is used for horizontal resizing
-#: and the lines value for vertical resizing.
-
-# window_border_width 1.0
-
-#: The width (in pts) of window borders. Will be rounded to the
-#: nearest number of pixels based on screen resolution. Note that
-#: borders are displayed only when more than one window is visible.
-#: They are meant to separate multiple windows.
-
-# draw_minimal_borders yes
-
-#: Draw only the minimum borders needed. This means that only the
-#: minimum needed borders for inactive windows are drawn. That is only
-#: the borders that separate the inactive window from a neighbor. Note
-#: that setting a non-zero window margin overrides this and causes all
-#: borders to be drawn.
-
-# window_margin_width 0.0
-
-#: The window margin (in pts) (blank area outside the border)
-
-# single_window_margin_width -1000.0
-
-#: The window margin (in pts) to use when only a single window is
-#: visible. Negative values will cause the value of
-#: window_margin_width to be used instead.
-
-window_padding_width 15
-# window_padding_width 0.0
-
-#: The window padding (in pts) (blank area between the text and the
-#: window border)
-
-# active_border_color #00ff00
-
-#: The color for the border of the active window
-
-# inactive_border_color #cccccc
-
-#: The color for the border of inactive windows
-
-# bell_border_color #ff5a00
-
-#: The color for the border of inactive windows in which a bell has
-#: occurred
-
-# inactive_text_alpha 1.0
-
-#: Fade the text in inactive windows by the specified amount (a number
-#: between zero and one, with zero being fully faded).
-
-#: }}}
-
-#: Tab bar {{{
-
+window_padding_width 12
 tab_bar_edge top
-
-#: Which edge to show the tab bar on, top or bottom
-
-# tab_bar_margin_width 0.0
-
-#: The margin to the left and right of the tab bar (in pts)
-
-# tab_bar_style fade
-
-#: The tab bar style, can be one of: fade or separator. In the fade
-#: style, each tab's edges fade into the background color, in the
-#: separator style, tabs are separated by a configurable separator.
-
-# tab_fade 0.25 0.5 0.75 1
-
-#: Control how each tab fades into the background when using fade for
-#: the tab_bar_style. Each number is an alpha (between zero and one)
-#: that controls how much the corresponding cell fades into the
-#: background, with zero being no fade and one being full fade. You
-#: can change the number of cells used by adding/removing entries to
-#: this list.
-
-# tab_separator " ┇"
-
-#: The separator between tabs in the tab bar when using separator as
-#: the tab_bar_style.
-
-# active_tab_foreground   #000
-# active_tab_background   #eee
-# active_tab_font_style   bold-italic
-# inactive_tab_foreground #444
-# inactive_tab_background #999
-# inactive_tab_font_style normal
-
-#: Tab bar colors and styles
-
-#: }}}
-
-#: Color scheme {{{
-
-# foreground #dddddd
-# background #000000
-
-#: The foreground and background colors
-
-# background_opacity         1.0
-# dynamic_background_opacity no
-
-#: The opacity of the background. A number between 0 and 1, where 1 is
-#: opaque and 0 is fully transparent.  This will only work if
-#: supported by the OS (for instance, when using a compositor under
-#: X11). Note that it only sets the default background color's
-#: opacity. This is so that things like the status bar in vim,
-#: powerline prompts, etc. still look good.  But it means that if you
-#: use a color theme with a background color in your editor, it will
-#: not be rendered as transparent.  Instead you should change the
-#: default background color in your kitty config and not use a
-#: background color in the editor color scheme. Or use the escape
-#: codes to set the terminals default colors in a shell script to
-#: launch your editor.  Be aware that using a value less than 1.0 is a
-#: (possibly significant) performance hit.  If you want to dynamically
-#: change transparency of windows set dynamic_background_opacity to
-#: yes (this is off by default as it has a performance cost)
-
 dim_opacity 0.95
-
-#: How much to dim text that has the DIM/FAINT attribute set. One
-#: means no dimming and zero means fully dimmed (i.e. invisible).
-
-# selection_foreground #000000
-# selection_background #FFFACD
-
-#: The foreground and background for text selected with the mouse
-
-
-#: The 16 terminal colors. There are 8 basic colors, each color has a
-#: dull and bright version. You can also set the remaining colors from
-#: the 256 color table as color16 to color255.
-
-# color0 #000000
-# color8 #767676
-
-#: black
-
-# color1 #cc0403
-# color9 #f2201f
-
-#: red
-
-# color2  #19cb00
-# color10 #23fd00
-
-#: green
-
-# color3  #cecb00
-# color11 #fffd00
-
-#: yellow
-
-# color4  #0d73cc
-# color12 #1a8fff
-
-#: blue
-
-# color5  #cb1ed1
-# color13 #fd28ff
-
-#: magenta
-
-# color6  #0dcdcd
-# color14 #14ffff
-
-#: cyan
-
-# color7  #dddddd
-# color15 #ffffff
-
-#: white
-
-#: }}}
-
-#: Advanced {{{
-
-# shell .
-
-#: The shell program to execute. The default value of . means to use
-#: whatever shell is set as the default shell for the current user.
-#: Note that on macOS if you change this, you might need to add
-#: --login to ensure that the shell starts in interactive mode and
-#: reads its startup rc files.
-
-# editor .
-
-#: The console editor to use when editing the kitty config file or
-#: similar tasks. A value of . means to use the environment variable
-#: EDITOR. Note that this environment variable has to be set not just
-#: in your shell startup scripts but system-wide, otherwise kitty will
-#: not see it.
-
-# close_on_child_death no
-
-#: Close the window when the child process (shell) exits. If no (the
-#: default), the terminal will remain open when the child exits as
-#: long as there are still processes outputting to the terminal (for
-#: example disowned or backgrounded processes). If yes, the window
-#: will close as soon as the child process exits. Note that setting it
-#: to yes means that any background processes still using the terminal
-#: can fail silently because their stdout/stderr/stdin no longer work.
-
 allow_remote_control yes
-
-#: Allow other programs to control kitty. If you turn this on other
-#: programs can control all aspects of kitty, including sending text
-#: to kitty windows, opening new windows, closing windows, reading the
-#: content of windows, etc. Note that this even works over ssh
-#: connections.
-
-# startup_session none
-
-#: Path to a session file to use for all kitty instances. Can be
-#: overridden by using the kitty --session command line option for
-#: individual instances. See sessions in the kitty documentation for
-#: details. Note that relative paths are interpreted with respect to
-#: the kitty config directory. Environment variables in the path are
-#: expanded.
-
-# clipboard_control write-clipboard write-primary
-
-#: Allow programs running in kitty to read and write from the
-#: clipboard. You can control exactly which actions are allowed. The
-#: set of possible actions is: write-clipboard read-clipboard write-
-#: primary read-primary The default is to allow writing to the
-#: clipboard and primary selection. Note that enabling the read
-#: functionality is a security risk as it means that any program, even
-#: one running on a remote server via SSH can read your clipboard.
-
 term xterm-256color
-
-#: The value of the TERM environment variable to set. Changing this
-#: can break many terminal programs, only change it if you know what
-#: you are doing, not because you read some advice on Stack Overflow
-#: to change it.
-
-#: }}}
-
-#: OS specific tweaks {{{
-
-# macos_titlebar_color system
-
-#: Change the color of the kitty window's titlebar on macOS. A value
-#: of system means to use the default system color, a value of
-#: background means to use the background color of the currently
-#: active window and finally you can use an arbitrary color, such as
-#: #12af59 or red. WARNING: This option works by using a hack, as
-#: there is no proper Cocoa API for it. It sets the background color
-#: of the entire window and makes the titlebar transparent. As such it
-#: is incompatible with background_opacity. If you want to use both,
-#: you are probably better off just hiding the titlebar with
-#: macos_hide_titlebar.
-
-# macos_hide_titlebar no
-
-#: Hide the kitty window's title bar on macOS.
-
-# x11_hide_window_decorations no
-
-#: Hide the window decorations (title bar and window borders) on X11
-#: and Wayland. Whether this works and exactly what effect it has
-#: depends on the window manager, as it is the job of the window
-#: manager/compositor to draw window decorations.
-
-# macos_option_as_alt yes
-
-#: Use the option key as an alt key. With this set to no, kitty will
-#: use the macOS native Option+Key = unicode character behavior. This
-#: will break any Alt+key keyboard shortcuts in your terminal
-#: programs, but you can use the macOS unicode input technique.
-
-# macos_hide_from_tasks no
-
-#: Hide the kitty window from running tasks (Option+Tab) on macOS.
-
-# macos_quit_when_last_window_closed no
-
-#: Have kitty quit when all the top-level windows are closed. By
-#: default, kitty will stay running, even with no open windows, as is
-#: the expected behavior on macOS.
-
-# macos_window_resizable yes
-
-#: Disable this if you want kitty top-level (OS) windows to not be
-#: resizable on macOS.
-
-#: }}}
-
-#: Keyboard shortcuts {{{
-
-#: For a list of key names, see: GLFW keys
-#: <http://www.glfw.org/docs/latest/group__keys.html>. The name to use
-#: is the part after the GLFW_KEY_ prefix. For a list of modifier
-#: names, see: GLFW mods
-#: <http://www.glfw.org/docs/latest/group__mods.html>
-
-#: On Linux you can also use XKB key names to bind keys that are not
-#: supported by GLFW. See XKB keys
-#: <https://github.com/xkbcommon/libxkbcommon/blob/master/xkbcommon/xkbcommon-
-#: keysyms.h> for a list of key names. The name to use is the part
-#: after the XKB_KEY_ prefix. Note that you should only use an XKB key
-#: name for keys that are not present in the list of GLFW keys.
-
-#: You can use the special action no_op to unmap a keyboard shortcut
-#: that is assigned in the default configuration.
-
-#: You can combine multiple actions to be triggered by a single
-#: shortcut, using the syntax below::
-
-#:     map key combine <separator> action1 <separator> action2 <separator> action3 ...
-
-#: For example::
-
-#:     map kitty_mod+e combine : new_window : next_layout
-
-#: this will create a new window and switch to the next available
-#: layout
-
-#: You can use multi-key shortcuts using the syntax shown below::
-
-#:     map key1>key2>key3 action
-
-#: For example::
-
-#:     map ctrl+f>2 set_font_size 20
-
-# kitty_mod ctrl+shift
-
-#: The value of kitty_mod is used as the modifier for all default
-#: shortcuts, you can change it in your kitty.conf to change the
-#: modifiers for all the default shortcuts.
-
-# clear_all_shortcuts no
-
-#: You can have kitty remove all shortcut definition seen up to this
-#: point. Useful, for instance, to remove the default shortcuts.
-
-#: Clipboard {{{
-
-# map cmd+c        copy_to_clipboard
-# map kitty_mod+c  copy_to_clipboard
-# map cmd+v        paste_from_clipboard
-# map kitty_mod+v  paste_from_clipboard
-# map kitty_mod+s  paste_from_selection
-# map shift+insert paste_from_selection
-# map kitty_mod+o  pass_selection_to_program
-
-#: You can also pass the contents of the current selection to any
-#: program using pass_selection_to_program. By default, the system's
-#: open program is used, but you can specify your own, for example::
-
-#:     map kitty_mod+o pass_selection_to_program firefox
-
-#: You can pass the current selection to a terminal program running in
-#: a new kitty window, by using the @selection placeholder::
-
-#:     map kitty_mod+y new_window less @selection
-
-#: }}}
-
-#: Scrolling {{{
-
-# map kitty_mod+up        scroll_line_up
-# map kitty_mod+k         scroll_line_up
-# map kitty_mod+down      scroll_line_down
-# map kitty_mod+j         scroll_line_down
-# map kitty_mod+page_up   scroll_page_up
-# map kitty_mod+page_down scroll_page_down
-# map kitty_mod+home      scroll_home
-# map kitty_mod+end       scroll_end
-# map kitty_mod+h         show_scrollback
-
-#: You can send the contents of the current screen + history buffer as
-#: stdin to an arbitrary program using the placeholders @text (which
-#: is the plain text) and @ansi (which includes text styling escape
-#: codes). For only the current screen, use @screen or @ansi_screen.
-#: For example, the following command opens the scrollback buffer in
-#: less in a new window::
-
-#:     map kitty_mod+y new_window @ansi less +G -R
-
-#: }}}
-
-#: Window management {{{
-
-# map kitty_mod+enter new_window
-
-#: You can open a new window running an arbitrary program, for
-#: example::
-
-#:     map kitty_mod+y      new_window mutt
-
-#: You can open a new window with the current working directory set to
-#: the working directory of the current window using::
-
-#:     map ctrl+alt+enter    new_window_with_cwd
-
-# map cmd+n       new_os_window
-# map kitty_mod+n new_os_window
-# map kitty_mod+w close_window
-# map kitty_mod+] next_window
-# map kitty_mod+[ previous_window
-# map kitty_mod+f move_window_forward
-# map kitty_mod+b move_window_backward
-# map kitty_mod+` move_window_to_top
-# map kitty_mod+r start_resizing_window
-# map kitty_mod+1 first_window
-# map kitty_mod+2 second_window
-# map kitty_mod+3 third_window
-# map kitty_mod+4 fourth_window
-# map kitty_mod+5 fifth_window
-# map kitty_mod+6 sixth_window
-# map kitty_mod+7 seventh_window
-# map kitty_mod+8 eighth_window
-# map kitty_mod+9 ninth_window
-# map kitty_mod+0 tenth_window
-#: }}}
-
-#: Tab management {{{
-
-# map kitty_mod+right next_tab
-# map kitty_mod+left  previous_tab
-# map kitty_mod+t     new_tab
-# map kitty_mod+q     close_tab
-# map kitty_mod+.     move_tab_forward
-# map kitty_mod+,     move_tab_backward
-# map kitty_mod+alt+t set_tab_title
-
-#: You can also create shortcuts to go to specific tabs, with 1 being
-#: the first tab::
-
-#:     map ctrl+alt+1 goto_tab 1
-#:     map ctrl+alt+2 goto_tab 2
-
-#: Just as with new_window above, you can also pass the name of
-#: arbitrary commands to run when using new_tab and use
-#: new_tab_with_cwd.
-#: }}}
-
-#: Layout management {{{
-
-# map kitty_mod+l next_layout
-
-#: You can also create shortcuts to switch to specific layouts::
-
-#:     map ctrl+alt+t goto_layout tall
-#:     map ctrl+alt+s goto_layout stack
-#: }}}
-
-#: Font sizes {{{
-
-#: You can change the font size for all top-level kitty windows at a
-#: time or only the current one.
-
-# map kitty_mod+equal     change_font_size all +2.0
-# map kitty_mod+minus     change_font_size all -2.0
-# map kitty_mod+backspace change_font_size all 0
-
-#: To setup shortcuts for specific font sizes::
-
-#:     map kitty_mod+f6 change_font_size all 10.0
-
-#: To setup shortcuts to change only the current window's font size::
-
-#:     map kitty_mod+f6 change_font_size current 10.0
-#: }}}
-
-#: Select and act on visible text {{{
-
-#: Use the hints kitten to select text and either pass it to an
-#: external program or insert it into the terminal or copy it to the
-#: clipboard.
-
-# map kitty_mod+e kitten hints
-
-#: Open a currently visible URL using the keyboard. The program used
-#: to open the URL is specified in open_url_with.
-
-# map kitty_mod+p>f kitten hints --type path --program -
-
-#: Select a path/filename and insert it into the terminal. Useful, for
-#: instance to run git commands on a filename output from a previous
-#: git command.
-
-# map kitty_mod+p>shift+f kitten hints --type path
-
-#: Select a path/filename and open it with the default open program.
-
-# map kitty_mod+p>l kitten hints --type line --program -
-
-#: Select a line of text and insert it into the terminal. Use for the
-#: output of things like: ls -1
-
-# map kitty_mod+p>w kitten hints --type word --program -
-
-#: Select words and insert into terminal.
-
-# map kitty_mod+p>h kitten hints --type hash --program -
-
-#: Select something that looks like a hash and insert it into the
-#: terminal. Useful with git, which uses sha1 hashes to identify
-#: commits
-
-
-#: The hints kitten has many more modes of operation that you can map
-#: to different shortcuts. For a full description see kittens/hints.
-#: }}}
-
-#: Miscellaneous {{{
-
-# map kitty_mod+f11    toggle_fullscreen
-# map kitty_mod+u      input_unicode_character
-# map kitty_mod+f2     edit_config_file
-# map kitty_mod+escape kitty_shell window
-
-#: Open the kitty shell in a new window/tab/overlay/os_window to
-#: control kitty using commands.
-
-# map kitty_mod+a>m set_background_opacity +0.1
-# map kitty_mod+a>l set_background_opacity -0.1
-# map kitty_mod+a>1 set_background_opacity 1
-# map kitty_mod+a>d set_background_opacity default
-
-#: You can tell kitty to send arbitrary (UTF-8) encoded text to the
-#: client program when pressing specified shortcut keys. For example::
-
-#:     map ctrl+alt+a send_text all Special text
-
-#: This will send "Special text" when you press the ctrl+alt+a key
-#: combination.  The text to be sent is a python string literal so you
-#: can use escapes like \x1b to send control codes or \u21fb to send
-#: unicode characters (or you can just input the unicode characters
-#: directly as UTF-8 text). The first argument to send_text is the
-#: keyboard modes in which to activate the shortcut. The possible
-#: values are normal or application or kitty or a comma separated
-#: combination of them.  The special keyword all means all modes. The
-#: modes normal and application refer to the DECCKM cursor key mode
-#: for terminals, and kitty refers to the special kitty extended
-#: keyboard protocol.
-
-#: Another example, that outputs a word and then moves the cursor to
-#: the start of the line (same as pressing the Home key)::
-
-#:     map ctrl+alt+a send_text normal Word\x1b[H
-#:     map ctrl+alt+a send_text application Word\x1bOH
-
-#: }}}
-
-# }}}